Flashing LG ADI CPU on UART and USB mode
Sunday, April 27, 2014
Add Comment
Flashing LG ADI CPU on UART and USB MODE
ADI phones are flashed with GSMulti. Can be flashed both in USB and UART mode, old phone only support UART.
ADI flashing on UART
1. Install and run GSMulti v30
2. Go to Setting(s) > Configuration, select DLL and firmware on S/W box, select UART as communication, select correct port of Box/cable, then click OK.
3. Now click START on main window, when the software says Wait Phone Connecting... connect POWERED OFF phone with battery to cable and press POWER button.
ADI flashing on USB
1. Install GSMULti V30
2. Install MTK Download Setting.
3. Connect POWERED OFF phone to usb cable, Windows will ask for driver, show driver from C:GSMULTIUsbDriversMTK.
4. Open USBMap from C:GSMULTI, select MTK(ADI) and click MAPPING
START, reconnect the phone to USB cable (re-insert battery also). Some info will show on PORT/KEYNAME, now SAVE & EXIT.
5. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK.
Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable.Press POWER but if not start
automatically.
0 Response to "Flashing LG ADI CPU on UART and USB mode"
Post a Comment